OUT OF oFFICE NOTICE: None

OFFICE HOURS: MONDAY - FRIDAY from 9 am - 4 pm Central Time Zone

SHIPPING NOTICE: Orders ship within 1 -2 business day from receipt. To avoid delays please provide a VALID EMAIL & PHONE #.

CAN'T FIND SOMETHING?  Use the Menu below,Search Box or Sitemap



MENU:



 

Follow us on Facebook.

Pyrography Gourd Art group on facebook. 

Follow me on Pinterest. 

Gourd, Pyrography, and Craft Supplies - Clearance Center Gourd, Pyrography and Craft Supplies

Save on discontinued gourd, pyrography and craft supplies including paint, dyes, beads, tools and more

Rock bottom prices on discontinued items or colors. Quantities of everything in the Clearance Center are limited & sale prices are in effect only while existing supply lasts. Price reductions are not retroactive on previous purchases.

this Page was Updated 3/25/17

3/25 - Prices Reduced ~ Items Sold Out & Removed

~ THIS PAGE IS ONLY UPDATED WHEN THERE HAS BEEN A CHANGE  ~

**Please check quantities before ordering**

IF THERE ARE LESS THAN 3 IN STOCK PLEASE CONTACT ME BEFORE ORDERING

NOTICE: BE SURE TO "REFRESH" (right click on the page then click on "reload" or "refresh") THE PAGE TO ENSURE YOU HAVE THE LATEST UPDATES!

~ NO MAIL ORDERS ON CLEARANCE CENTER ITEMS ~

~ ALL SALES ARE FINAL ON CLEARANCE CENTER ITEMS ~

About Razertip items in the Clearance Center

All Razertip products listed in the Clearance Center are brand new but I am no longer going to stock them. As with all items in the Clearance Center all the Razertip items in the Clearance Center are sold as "ALL SALES ARE FINAL."

If there is a problem with any Razertip product purchased from the Clearance Center they are still fully covered under the Razertip warranty & can be returned directly to Razerip for repair or replacement.

None of the Razertip items listed here are being discontinued by Razertip. I am discontinuing them to make room for other items. All Razertip items that I do not stock will be still be available as a special order at my discounted prices.

Miscellaneous Recently Added

The fine-tipped Pointed applicators are great for very fine detail work.

 

Item Description and Uses Order
Fine Tip Pointed Cotton Applicator.

#NS-  FINE TIP POINTED APPLICATORS

25/PACK

These are great for those who need an applicator with a very fine point.

The photo on the bottom shows the fine-tipped cotton applicator next to a standard pointed tip cotton applicator.

These will allow you to get into the tiniest spots for fine detail work.

.

Retail Price: $1.95

Clearance Price: $1.50

ONLY 6 PACKS LEFT IN STOCK

Regular Tip Pointed Cotton Applicator.

Razertip #HD9PL Gourd Poker/Long Writer

Great for working on gourds & other materials. So many uses such as: for filigree on gourds & pointilism. Just use your imagination & experiment!

Item Description and Uses Order
Razertip F9P-L Small Long Writing Tip.

#RTHD9PL - Gourd Poker/Long Writer

EXCLUSIVE

This was made to my specifications. It is very similar to the standard #9P, but with a longer tip (3/4"). This is a heavier gauge wire than the regular 9P to provide more stability going through the gourd or wood.

I designed this out of need. I wanted something to make holes for inserting feathers into a gourd mask rather than having to go out into the shop to use a drill & make a mess with the sawdust this does a great job & I can do it in my studio. It does a great job for making holes on any thickness of gourd; it's good for lacing & filigree as well as pointillism. It is also good for making delicate cuts in the gourds. Use this with a gentle sawing action.

Retail Price: $32.50

Clearance Price: $25.25


Razertip Wide-Groove Detail Tip Style

The Wide-Groove Detail tip Steel blade is great for general shading, undercutting. creating broad lines.

Item Description and Uses Order
Razertip F71.04 Wide Groove Detail V Tip Pen.
Razertip F71.04 Wide Groove Detail V Tip Pen Side View.

#RTF71.04 - Wide-Groove Detail Tip 4mm

Also Known as: "V" Tip

The steel blade holds heat beautifully and gives a wide groove texture.Wide Groove Detail Tip.

Even wider than Series 17 tips, these tips have a steel blade welded onto the end. They can burn a groove up to 3/32” wide.

They take a bit longer to heat up, but once heated they hold their heat better than a wire tip & you will get better heat distribution. They are also much stronger than a plain wire tip.

The 4mm heats up better than the 6 mm and will perform better on gourd & flat burning & is more nimble than the 6 mm. The 6mm size heats less and is better on softer woods such as tupelo used by carvers. I do not stock the 6mm but can special order it at my discounted price.

Ideal for custom stamps, brands or whatever your imagination allows. They make superb custom calligraphy tips!

Heavy duty cord is recommended. Our brass brush #HB58 is perfect for cleaning these tips.

Heavy duty cord is recommended.

Retail Price: $28.50

Clearance Price: $23.25

Razertip #2 Round Tip Style

Round tips are great for general fine detail work. They work great on concave & uneven surfaces as well as delicate shading. The round shaders give you a broad coverage area. Round shaders excel at shading where outer margins are concave (like the inside of a circle or eye). Also popular for shading using circular motions on the surface. Unlike the Bent Spear Shader, these do not do well getting into tight spots.

This item is not being discontinued by Razertip but I will no longer be stocking them. Once existing stock is gone they will be available as a special order.

Item Description & Uses Click on the arrow
to the right of the button to choose an option
Razertip F2S Small (tight) Round.

#RTF2S - Small (Tight) Round

This pen is tight round is great for working on concave & irregular surfaces. It is recommended by Hellen Martin in her pyrography classes.

Retail Price: $28.50

Clearance Price: $23.25

ONLY 6 LEFT

Razertip Miscellaneous Tip Sets

These items are not being discontinued by Razertip but I will no longer be stocking them. Once existing stock is gone they will be available as a special order.

Item Description & Uses Click on the arrow
to the right of the button to choose an option

Nedra's Gourd Tip Set from Razertip.

Includes:

#TH30M Med. Spoon Shader

#TH1SL Long Small Skew Cutter

#TH14SM Round-Heel Knife

#TH5S Small Spear

#TH99.015 Ball

RTSET5GD2 - NEDRA'S ARTIST GOURD TIP SET
5 Piece Tip Set

EXCLUSIVE

Contains the 5 most popular & versatile tips suitable for gourd artists. These tips are all HD versions. They are the same tip styles sold in my Deluxe Gourd Starter Kit.

Use with the Binding-Post Interchangeable-tip Pen #BPH.

Retail Price: $23.60

Clearance Price: $19.00

ONLY 9 LEFT

Option
   

Razertip Set5GD Gourd Artist Tip Set.

Includes:

#T9G17 Gourd Cutter

#T99.015 Ball Stylus

#TH1S Sm Skew

#TH1SL Long Small Skew Cutter

#TH5MSP Medium Sm Bent Spear Shader

RTSET5GD - GOURD ARTIST TIP SET
5 Piece Tip Set

Contains 5 popular tips suitable for gourd artists.

Use with the Binding-Post Interchangeable-tip Pen #BPH.

Retail Price: $21.60

Clearance Price: $16.50

ONLY 7 LEFT

     

Razertip Heavy-Duty Bird Carver's Set.

Includes:

#TH1S Sm Skew

#TH2M Md Round

#TH4M Flat Skew

#TH5M Md Spear

#TH6M Md Chisel

#TH7L Lg Round Skew

#TH8 Burnisher

#TH9 Writer

RTSETHD8 - HEAVY-DUTY BIRD CARVER'S
8 Piece Tip Set

Heavy Duty Bird Carver's - 8 piece Tip Set. Contains 8 of Razertip's most popular bird carvers tips.

Use with the Binding-Post Interchangeable-tip Pen #BPH.

Retail Price: $35.40

Clearance Price: $27.50

ONLY 4 LEFT

 

Razertip Cords

These cords have not been discontinued by Razertip but I will no longer be stocking them. Once existing stock is gone they will be available as a special order.

Standard "FL" cords (Black plugs) use an 18-gauge cord for maximum flextibility.

NOTE: 3/25/17 PRICES REDUCED

Cord Type Description Click on the arrow to choose the option
Razertip Cord 3F.

CORD3FL

#RTCORD3FL - Standard Extra-Flex Cord

CCORD #3: 18 gauge Extra-Flex cord allows you to use Razertip pens on power supplies that have a 1/4" phone plug connection (Burnmaster, Detailmaster, etc.).

RETAIL PRICE: $17.50

CLEARANCE PRICE: $13.50

ONLY 7 LEFT

NOTE: Once existing stock is gone it will be available as a special order.

Option
   
Razertip Cord 4F.

RCORD4FL

#RTCORD4FL - Standard Extra-Flex Cord

CCORD #4: 18 gauge Extra-Flex cord - Attaches To "U" Connectors. Allows you to use Razertip pens on power supplies that have two "U" connectors (such as newer Colwood Detailer, Galaxy & Super Pro II). Must be attached to box with screws. 1M (39") long.

RETAIL PRICE: $17.50

CLEARANCE PRICE: $13.50

ONLY  LEFT

NOTE: Once existing stock is gone it will be available as a special order.

   

Razertip Cord HD for Detailmaster Pens.

CORD8HD

#RTCORD8HD - HD Extra-Flex Cord

RCA(M) to 1/4" (F)

CORD #4: Allows you to use Detail Master Pens on Razertip power supplies. This cord is 12 inches long & is only available in the HD version.

RETAIL PRICE: $18.50

CLEARANCE PRICE: $14.50

ONLY 13 LEFT

NOTE: Once existing stock is gone it will be available as a special order.


Razertip #16 "V" Shader

The 45 Degree "V" Shader is very similar to the #5 Bent Spear Shader. Both shaders are bent at a 45 degree angle making it very comfortable to use. The "V" shader is a wider "spread" & straighter edge. Just like the #5 Shader these are very versatile & performs much like the #5 shaders. I think the big difference is the wider stroke you can achieve but the #5 still remains the best overall in terms of versatility because of the spear shape it will also perform better for doing curved lines using the edge.

These items are not being discontinued by Razertip but I will no longer be stocking them. Once existing stock is gone they will be available as a special order.

NOTE: 3/21/17 PRICES REDUCED

Item Description & Uses Click on the arrow to the right of the button to choose an option
Razertip HD16S Small "V" Shader.

#RTHD16S - Small "V" Shader

This is the small size of the "V" shaders. It has a wider profile & straighter edge than the #5 Spear shaders. It is a general purpose shader & is great for doing gradient tone shading. You can also use this for lines as well as undercutting.

Retail Price: $32.50

Clearance Price: $25.25

ONLY 6 LEFT

Size
   
Razertip HD16M Medium "V" Shader.

#RTHD16M - Medium "V" Shader

Same as above but larger

Retail Price: $32.50

Clearance Price: $25.25

ONLY 7 LEFT

   
Razertip HD16L Large "V" Shader.

#RTHD16L - Large "V" Shader

Same as above but larger

Retail Price: $32.50

Clearance Price: $25.25

ONLY 5 LEFT


Razertip #99 Ball Stylus Fixed-Tip Pens & Tip Sets

These two sizes are being discontinued to make room for new sizes.

These items are not being discontinued by Razertip but I will no longer be stocking them. Once existing stock is gone they will be available as a special order.

Item Description and Uses Click on the arrow to the right of the button to choose an option
Razertip F99.011.

Shown with .5 mm lead pencil & fine ball point pen

#RTF99.012 - Ball Stylus 1.2 mm 3/64" Steel Ball Fused on the Tip

Same as above but larger.

Retail Price: $28.50

Clearance Price: $23.25

ONLY 4 LEFT IN STOCK

Size
   

Razertip F99.023 Ball Stylus.

#RTF99.023 - Ball Stylus 2.3 mm 3/32"

Steel Ball Fused on the Tip End

Same as above but larger. The ball on this pen is no longer wired, it is fused just like the smaller versions.

Retail Price: $28.50

Clearance Price: $23.25

ONLY 10 LEFT IN STOCK

Razertip Circle & Square Stamper Individual Tips

NOTICE: The tips & Tip set listed below are made for use with the Razertip Binding-Post Interchangeable (BPH) Tip Pen listed on this page.

These items are not being discontinued by Razertip but I will no longer be stocking them. Once existing stock is gone they will be available as a special order.

NOTE: 3/21/17 PRICES REDUCED

Item Description and Uses Order

Available Sizes:

Small Circle Stamper.

#T92-21 Small Circle (.0827 inch)

RT-T92 - CIRCLE STAMPER TIPS
Individual Tips

Used to "brand" or stamp small circles into all surfaces. Copper tube is crimped on to the tip. Allow extra time for heating up and cooling down. Heavy duty cord recommended.

These copper circle tips are perfect for stamping circles. Use it just like a stamp! They are available in 3 sizes (sizes are listed on the left)

These tips make uniform circles with each depression. They work great on wood & gourds.

They are only available in standard tips.

The Circle Stamper's are very popular with gourd artists for making holes in the gourds. They do a great job of making holes through the gourd shell.

You can clean the Circle Stamper tips with our brass brush found at the bottom of our Razertip Burners, Kits & Accessories page.

They are intended for use with the Binding-Post Interchangeable-tip Pen #BPH.

Clean these with the brass brush listed at the bottom of the page.

 

INDIVIDUAL TIPS PRICE: $6.00/each

CLEARANCE PRICE: $4.00/each

T92-2.1 - ONLY 4 LEFT


Hand Carved Wooden Beads

These Zuni bears are hand-carved by Alan Denison & are carved on a variety of woods such as: maple, apple, alder, oak, basswood and Alaskan cedar.

NOTE: 3/21/17 PRICES REDUCED

Item Description and Uses Click on the arrow to the right of the button to choose an option

Hand carved wooden zuni bear bead.

Hand carved wooden zuni bear bead top view showing hole.

light wood

Hand made Wood Zuni Bear - Light approx. 1/4" x 1"

EXCLUSIVE!

Because it is hand-made size is approximate & no two are exactly alike. There is a hole drilled from the top of it's back through the body and out the bottom between it's legs. These are unfinished so you can burn, decorate, paint or stain it yourself.

PRICE: $4.00

CLEARANCE PRICE:  $2.50 each

ONLY 9 LEFT

Choice of wood
   

Hand carved wooden zuni bear bead in dark wood.

Darker woods

Hand made Wood Zuni Bear - Med/Dark approx. 1/4" x 1"

EXCLUSIVE!

Same as above but it is made in medium to dark woods.

PRICE: $4.50

CLEARANCE PRICE:  $3.00 each

ONLY 8 LEFT


Nedra's Special Formula

Squirt bottle & large refill bottle still available in the Mediums page

Item

Description Click on the "Add to Cart" button to order
Nedra's Special Formula 2 oz Size.

Photo shows the squirt bottle


GourdSupply Products

Nedra's Special Formula 2 oz. Spritz Bottle

Nedra's Special Formula is just what you need to clean & condition stamp pads, remove ink, condition dry gourd shells & so much more. ASTM D4236 approved

Here's just some of the uses:

  • Clean & condition stamp pads
  • Condition dry gourd shells allowing water-based chalk, dye & pigment inks to go on smoother
  • Makes it easier to blend colors
  • Prevents inks from soaking in & becoming very dark on gourd shells that are excessively dry
  • Removes pigment & dye inks from gourd shells, stamps & other materials using just a few drops on a piece of felt, microbrushes or a cloth rag
  • Use as a medium to lighten or dilute ink
  • Use as a base coat on gourds
  • Create a beautiful translucent shimmer by mixing it with Pearl Ex Powdered Pigments

How to use it as a medium:

  • Nedra's Special Formula is used just like the ink dyes.
  • It can be applied with any of the applicators in the applicator & brushes section of our store front such as: felt or foam applicator cubes, cotton-tipped applicators, a piece of felt, Microbrushes, or just about any other applicator or brush we carry.
  • Just spritz or squeeze a few drops out on an applicator or directly into the inks.
  • Just like the GourdSupply Products dye inks you wipe off the excess so it speeds up drying time.
  • Cleans up with water.

How to use to clean or condition a stamp pad or dry gourd shell.

  • To clean a stamp pad or remove ink from a gourd just spritz some Special Formula to a dry cloth and wipe your stamp clean.
  • To condition a dry gourd shell spritz some onto the cleaned gourd and rub it into the surface with a dry cloth before you use the dye inks. This will seal a dry gourd before applying the inks which will allow for better coverage to the surface of the gourd and prevent the ink from soaking into the dry shell.

It will not flake off or peel when varnish is applied over it like protective waxes will do. It is very concentrated so a little goes a long way.

RETAIL: $5.50

CLEARANCE PRICE: 4.25

ONLY 2 LEFT IN STOCK

PRICE REDUCED 3/21/17

     
Nedra's Special Formula 8 oz Refill.

GourdSupply Products

Nedra's Special Formula 8 oz. Refill Size

Same as above but larger size bottle without a squirt top

RETAIL: $17.95

CLEARANCE PRICE: 15.75

PRICE REDUCED 3/21/17

     

Basswood & Maple Blanks for Carving, Pyrography & Other Crafts

These items are the last of the wood products I still have. I will not be ordering or making these anymore & supply is limited to what is on hand. Due to the weight & need for special packing needed to ensure they are protected from damage in transit these items have a flat shipping rate that will be added upon checkout.

NOTE: 3/25/17 PRICES REDUCED

SAVE ON SHIPPING: If you want to find out if I can save some you some money on shipping these items please contact me. I will give you a quote for manual invoicing without going through PayPal vs ordering direct from the website.

Item Description Order
     
Utensil Holder Unfinished.

#SC101 - Utensil Holder

Unfinished

BEST SELLER!

Nedra's finished utensil holder shown here was featured in the September, 2009 issue of New Mexico Magazine. It is pictured here as an example of what you can do with it.

The holder is hand-made by Alan Denison. It is made with finger joints & is suitable for burning, carving or other crafts. These holders are heavy & will not fall over when filled with utensils.

Because they are hand made each one is slightly different.

PRICE: $29.95

CLEARANCE PRICE: $25.00

ONLY 1 LEFT IN STOCK

Utensil Holder Finished.
     
Basswood Double Napkin Holder.

Basswood Double Napkin Holder.

#SC200 - Basswood Double Napkin Holder

This napkin holder is one that I used to order from a man who made them for me. It is made out of beautiful quality basswood.

This is suitable for pyrography, carving, painting or other crafts.

 

PRICE: $16.95

CLEARANCE PRICE: $13.00

ONLY 1 LEFT IN STOCK

     
Napkin Holder.

#SC201 - Napking Holder

Unfinished

The napkin holder is hand-made by Alan Denison in basswood. It is  suitable for burning, carving or other crafts.

PRICE: $13.95

RETAIL PRICE: $11.95

ONLY 1 LEFT IN STOCK


Foredom Rotary Micromotor Tool Accessories

NOTE: 3/20/17 PRICES REDUCED

Item Description Order

Foredom Collet Adaptor (Sleeve).  

#FDHPL4-3234 Collet Adapter (Sleeve)

1/8" to 1/16" Collet Adapter

This is NOT a collet. It is a 'step down' adapter that fits inside a 1/8" collet and allows the use of smaller, 1/16" shank size accessories. No need to change handpiece collets

PRICE: $16.30

CLEARANCE PRICE REDUCED: $13.00

ONLY 1 LEFT


Feathers

I have an abundance of feathers that I am closing out. These are feathers that were purchased for my own personal use for gourd masks, for my classes & for sale at shows. Due to the large quantity & variety that I stocked I never posted them on the website.

Since I am no longer doing masks, classes or shows anymore I have posted them all on the website. The feathers are being sold at my cost or below. Since there are hundreds of packets of feathers I have added them to their own pages by size but they are considered Clearance Center items.

There are 6 pages with feathers & every "pack" has been individually photographed. Due to the large quantity & the fact that in most cases there is only 1 pack of each left I did not make up PayPal buttons for them because it was too labor intensive.

Click on the link to go to the main feather page: Main Feather Page. All the feather pages will pop to the top of the menu.

If you want any of the feathers please send me an email with the following information:

  • Your name, address & phone number
  • Item number & description of the feathers you want

I will send you an invoice through PayPal. Once paid the order will ship. The items will be left on the website until the invoice is paid so it's best to pay the invoice ASAP.

Rotary Display Stands

These items have been used to display gourds at the last 3 shows we did before I stopped doing shows. They are "like new" & are working perfectly. The shows that I needed these for did not have power available where my gourd art displays were so these were ideal. They ran all day & never ran out of battery power. It rotates slowly so it will not jerk delicate gourd art.

NOTE: 3/21/17 PRICES REDUCED

Item Description and Uses Order

Rotary Display Stand.

8" & 10" Sizes

Rotary Display Stand.

#NS - Rotary Display Stand
8 inch turntable

Black Velvet Top Rotating Display Turntable. This turntable is great to take to shows. Works with battery or electric.

Rotates 360 degrees to show all sides such as gourd art.

  • Anti-slip black velvet top
  • Power by 1.5V "D" battery or AC plug (not included)
  • On/Off switch
  • 360 degree rotating
  • Ideal for display Jewelry, models, gourds, etc.

RETAIL PRICE: $24.99

CLEARANCE PRICE: $18.00

ONLY 1 AVAILABLE

Due to size & delicate nature which requires special packaging please contact me to order.
 

#NS - Rotary Display Stand
10 inch turntable

Same as above but larger size

RETAIL PRICE: $28.99

CLEARANCE PRICE: $21.00

ONLY 1 AVAILABLE


Miscellaneous Craft Supplies

During our move a lot of our personal stuff went into storage that we intended to put outfor our community's annual yard sale this weekend. When I started opening bins I discovered one was filled with items that I used to take to classes & shows & in all the confusion of moving it mixed in with our personal items going into storage. All of these items are new & still in the original packaging.

NOTE: 3/25/17 PRICES REDUCED

Item Description Click on arrow below to choose the quantity
Split Keys Nickel.

Split Key Rings Nickel

1 inch

Spring steel split rings are perfect for using with leather shapes and key fobs.

RETAIL PRICE: $2.79/10 pack

CLEARANCE PRICE: $2.00/10 pack

ONLY 1 LEFT

     

Fun Fur Prints Yarn Sandstone.

Sandstone

Fun Fur Prints Yarn Sandstone Closeup.

Close up

Fun Fur Prints Yarn

1.5 oz (40g) 57 yd.

Sandstone: Soft gray, brown, and whiteThe Ancients gourd.

A novelty eyelash yarn Fun Fur is the go-to yarn for that luxurious fur-look; Use it for entire projects from fashion accessories to home accessories as well as other crafts.

100-Percent Polyester. Machine washable.

This makes a really fun & unique accent on gourd art.

The gourd shown here has fun fur around the neck of the gourd as an accent where the leather trim meets the painted cork stopper.

RETAIL PRICE: $3.99 each

CLEARANCE PRICE: $2.75

ONLY 1 OF LEFT


Brushes

Discontinued brushes

NOTE: 3/21/17 PRICES REDUCED

Taklon Bristle Detail Brush Sampler.

Taklon Brush Sampler Photo

The photo on the left shows samples of both Taklon brush styles using the Acrylic Pigment inks on paper. The Micro Detail brush does the finest lines of any brush I've ever used. The Tapered brush does a great job of doing fine detail but it has a broader stroke.

Item Description Click on arrow below to choose the quantity
KT34003 Tapered Taklon Bristle Detail Brush.

#KT34003-10 Taklon Tapered Detail Brushes - 10 Pk

This brush is similar to the all time favorite micro detail brush listed above but is slightly broader & has a more tapered tip. It is very popular among gourd artists & those who work on miniatures.

Thin Taklon Bristles with 3 1/2" long Polypropylene Handle

MSRP: $4.00/10 pack

CLEARANCE PRICE: $2.75/10 pk

Quantity
 

#KT34003-25 Taklon Tapered Detail Brushes - 25 Pk

Same as above but 25 pk

MSRP:  $9.00/25 pack

CLEARANCE PRICE: $6.00/25 pk

 

#KT34003-100 Taklon Tapered Detail Brushes -100 Pk

Same as above but 100 count economy size

MSRP: $30.00/100 pack

CLEARANCE PRICE: $17.00/100 pk


 

Miscellaneous Discontinued Items

Miscellaneous gourd & craft supplies

NOTE: 3/21/17 PRICES REDUCED

Item Description Order
Ranger Mini Mister.

#RGRMIS22701 - Mini Mister

3 pack - CLEAR

Introducing the compact, portable Mini Mister Inkssentials spray bottles. Perfect to use with water, Nedra's Special Formula or your favorite craft mediums for interesting techniques. Fill with water & water-based products such as GourdSupply Products Dye inks, Acrylic Pigment inks, Nedra's Special Formula or rubber stamp cleaners.

RETAIL PRICE: $5.00/3 Pack

CLEARANCE PRICE: $3.50/3 Pack

ONLY 3 LEFT IN STOCK


Razaire Dust Collection System Filters & Accessories

In preparation for new Razertip products coming in the Spring I have opted to discontinue stocking all Razaire products.

Once existing stock is exhausted they will be available only as special orders.

Razaire Dust Collector Filters
Image Description Click on the arrow to the right of the button to choose an option
Razaire High 80% Efficient Filter.

#RTZF28 - Razaire High 80% Efficient Filter (Pink)

Best used for hard to capture particles like soapstone & eggshell. Also good for maximum efficiency when a single stage is desirable.

Due to the fine weave of this filter it is not as easily cleaned as the others and will require more frequent replacement. For best results we recommend using it as a second stage with a standard filter in front.

RETAIL PRICE: $30.50

CLEARANCE PRICE: $26.00

ONLY 1 LEFT IN STOCK


Miscellaneous Foredom Carving Burs & Accessories

Typhoon Tungsten Carbide Burs 2.35 mm & 1/8" Shank

Carbide Burs for Rotary Tools are very durable and will outlast most other types of burs. These are designed to remove a lot of material quickly.

Typhoons have unique structurally aligned tungsten carbine points that last long and do not load quickly. Use the fine grit for general shaping and sanding. The coarse grit is for more even rapid and aggressive shaping and roughing out work. Typhoons are ideal for use on hard and soft woods, acrylic, die stone, plaster, hard rubber, fiber glass and gourds.

NOTE: Be sure to order a brass brush to remove dust and chips from between rows of carbide points. Do not use a file card or steel brush to clean Typhoon burs and sleeves.

MSRP: $17.60

CLEARANCE PRICE: $12.95

NOTE: 3/21/17 PRICES REDUCED

Item

Description

BEST SELLERS!

Click on the arrow to the right
of the button to choose an option
AKB18639 Dove Tail Typhoon Carbide Bur.

#FDKB18639 - Dove Tail Typhoon

Fine

ONLY 1 LEFT

Option
   
AKB18715 Ball Nose Typhoon Carbide Bur. #FDKB18715 - Ball Nose Typhoon
Fine

ONLY 1 LEFT


Steel Fluted Engraving Burs & Carving Drills

High Speed Vanadium Steel Fluted Engraving burs for etching, engraving and other fine detailing work on gourds, metal, wood, glass, ceramics, etc. The Gourd Carving Rotary Tool Kit contains a set of all 5 of these burs.

These burs are contained in the Gourd Carving Flexible Shaft Tool Kit.

2.35mm (3/32") Shank; 1-3/4" Overall Length

INDIVIDUAL BUR PRICE: $1.50

CLEARANCE PRICE: $1.40

Item

Description

Click on the arrow to the right
of the button to choose an option
1/32" Steel Fluted Inverted Cone #AP3.

#FDP3 Vanadium Steel Fluted Inverted Cone 1/32"

ONLY 5 LEFT


Plated Diamond Burs

Diamond Burs are one of the most popular and best suited for detail carving, sanding and final finishing. Diamond burs are the least aggressive carving bur. The balls are one of my favorite burs for carving my petroglyph designs and I have them in all sizes.

Its plated blank is precision turned for even coverage & a strong bond. Conforms to ISO specs for medium diamond grade-120-200 grit/100-60 micron.

All of the plated diamond burs come with a 2.35mm (3/32") shank

For use on hardened steel, glass, precious metals, ceramics, stone, gourds & composite materials in industrial, jewelry & laboratory applications; on hard & soft woods for carving fine detailing & texturing; & gourd art. 120,000 RPM Max Speed

PRICE: $3.75

CLEARANCE PRICE: $3.00

NOTE: 3/21/17 PRICES REDUCED

Diamond Plated Burs - Ball
Option
Foredom Plated Diamond Ball 1.8mm.

#FDPD5 Plated Diamond - Ball

Ball with 1.8mm head diameter, 1.6mm head length

ONLY 3 LEFT

Foredom Plated Diamond Ball 1.6mm.

#FDPD24 Plated Diamond - Ball

Ball with 1.6mm head diameter, 1.4mm head length

ONLY 6 LEFT

Foredom Plated Diamond Ball 2.6.mm.

#FDPD25 Plated Diamond - Ball

Ball with 2.6mm head diameter, 2.0mm head length

ONLY 2 LEFT

Foredom Plated Diamond Ball 2.1mm.

#FDPD30 Plated Diamond - Ball

Ball with 2.1mm head diameter, 1.6mm head length

ONLY 3 LEFT

     
Diamond Plated - Miscellaneous Styles
Foredom Plated Diamond Inverted Cone 2.6mm.

#FDPD27 Plated Diamond - Inverted Cone

Inverted cone with 2.6mm head dia., 2.0mm head length

ONLY 7 LEFT

     
Foredom Plated Diamond Cylinderl 1.2mm.

#FDPD2 Plated Diamond - Cylinder

Cylinder with 1.2mm head dia., 5.0mm head length

ONLY 10 LEFT

Option
Foredom Plated Diamond Cylinder 2.3mm.

#FDPD9 Plated Diamond - Cylinder

Cylinder with 2.3mm head dia., 7.0mm head length

ONLY 13 LEFT

Foredom Plated Diamond Cylinder 4.0mm.

#FDPD10 Plated Diamond - Cylinder

Cylinder with 4.0mm head dia., 8.0mm head length

ONLY 5 LEFT

     
Foredom Plated Diamond Taper 2.5mm.

#FDPD15 Plated Diamond - Taper

Taper with 2.5mm head dia., 7.0mm head length

ONLY 6 LEFT

Option
Foredom Plated Diamond Wheel 5.8mm.

#FDPD20 Plated Diamond - Wheel

Beveled wheel shape with 5.8mm head dia.

ONLY 4 LEFT


Little Dippers

These handy scoops are perfect for so many things including: paints, Pearl Ex powdered pigments, embossing powders, beads, etc.

     
Little Dippers Scoops for Wet or Dry Mediums.

#US1115 - Little Dippers

1 CC Capacity - 5 pack

Little plastic scoops sure to become an instant studio companion! The size of each scoop, makes them perfect for reaching into narrow containers & for portioning out wet or dry materials.

Ideal for scooping out liquid paints as well as Embossing powders & Powdered Pigments. These are larger than the mini scoops making them more versatile. These are reusable & will last for years.

RETAIL PRICE: $3.50/5 Pack

CLOSE-OUT PRICE: $1.60/5 Pack

ONLY 10 PACKS LEFT


Foredom Handpiece Accessories

Chuck Keys and Wrenches, Handpiece grips used for changing Collets and accessories

NOTE: 8/21/16 PRICES REDUCED

Item Description Order
Foredom HPCK-0 Chuck Key in Molded Plastic Handle.

#FDHPCK-0 Chuck Key with Plastic Handle

Chuck key in plastic handle for use with 30, 30H, 30SJ and 25C Handpieces. Makes accessory changes easier and the key more difficult to misplace.

PRICE: 6.50

CLEARANCE PRICE: $3.75

ONLY 1 LEFT

Options
   
Foredom HP72 Chuck Key.

#FDHP72 Chuck Key

Chuck key for use with H.30, H.30H, H.30SJ and H.25C Handpieces. Also for Chuck Arbors A-JCA-1 and A-JCA-2.

PRICE: 3.20

CLEARANCE PRICE: $2.00

ONLY 1 LEFT

   
Foredom HP10588 Pin & Chuck Wrench.

#FDHP10588 Pin & Chuck Wrench

Pin and wrench for H.28, H.28H and H.28SJ Handpieces. Use for changing collets and accessories.

PRICE: 4.25

CLEARANCE PRICE: $2.45

ONLY 1 LEFT